Car door magnet -DesignsCandy - 3 sizes to choose. For Fashion Independent consultants-Marketing consultants

22.00 EUR

Size

Quantity

Product Description

This listing is for a Car door magnet for Fashion Independent consultants. Personalized with your own information and shipped to your home, ready for use on you car doors.

Choose from drop-menu the size (NEW SIZES):
-Small: 8.7 x 11.5 inches. for smaller vehicles
-Medium: 11.5x17.6 inches. for SUV or van vehicles.
-Large: 18x24 inches. For van vehicles and Full size SUV

Please include in Notes to seller your business information:
-Name
-Telephone
-Email
-Facebook Group Name

In 24 hours or left you will receive the proof, that you have to approve for send to print/shipping. Printing turnaround 2 business days, Standard shipping is for 5 business days. Only shipping to United States.

Prices include sales tax!

Application Instructions*

Preparation
Before affixing the Magnet to a metal surface, be sure all surface paints, clear coats and waxes are cured or hardened. Approximate curing times are: paint - 90 days, clear coat - 60 days, wax - 2 days.
Prior to application, clean the metallic surface and the Magnet with a mild detergent. Wipe with a soft cloth and allow to dry. Follow the recommendations on the detergent and those of the car manufacturer.
The Magnet should be at room temperature when applying.
Take care when handling the Magnet in extremely cold conditions, as it can become brittle.

Determine the location to place the Magnet
Ensure surface is metallic and smooth, flat or only slightly curved.
Don’t apply the Magnet on an area that isn’t steel or metal or that has extensive non-metallic fillers. Aluminium, wood or fiberglass will not function as a surface.

Affix the Magnet onto the surface.
Make sure the entire Magnet is flat against the metal surface. Do not place over protrusions (moulding, decals, pin striping, etc.) or concave areas.
Ensure there are no air pockets or moisture between the Magnet and the vehicle surface and that corners and edges are smooth and flush with the surface.
Curvature on the edges of the Product may result in the Magnet falling off.
To adjust the location of the Magnet after placement, remove completely and reposition by lifting from the sides to remove; do not remove from the corners. Please note that sliding the Product into position may cause stretching and/or scratching.

Maintenance and storage
Remove the Magnet carefully for cleaning at least weekly, though some climates or conditions may require daily cleaning. Lift the magnet carefully on the sides, do not pull the magnet off by the corners first. Do not remove the magnet with any sharp objects or fingernails. Make sure the magnet and the corners or edges do not get buckled or folded when removing.
Clean both the Magnet and the metal surface with a mild detergent and wipe with a soft cloth or allow to air dry.
Store Magnets flat in a clean, dry place when not in use.
Don’t place other objects on top of a stored Magnet. Don’t store with magnetic surfaces facing each other when multiple magnets are stored together.